Australia power cord plugs with Australian SAA certification are built to the AS 3112 and IEC standards for Australia AC power cord applications also known as Australian mains power lead, We are producing two and three prong Australian power cords in standard configurations and can make any custom version as well.100percent of our Australia power cords are fully molded high quality cords and RoHS and REACH compliant.
We offer AS 3112 plug standard 15A 250V through 2.5A 250V Australia two and three prong power cords.
You can find just about any country worldwide in our Products Tecnology.
Australia to C7 power cord: AS3112 Australia standard 2P plug to IEC C7 with Australia SAA approval.This Australian power cord is also referred to as the AS3112 to C7 mains power lead or AS 3112 to C7 mains cable.
View the technical drawing:D05 to C7 Power Cord drawing(PDF)
Australia to C13 power cord: AS3112 Australia standard 3P plug to IEC C13,Australia SAA approval. This Australian power cord is also referred to as the AS3112 to C13 mains power lead or AS 3112 to C13 mains cable.
View the technical drawing:D06/IEC C13 Power Cord drawing(JPG)
Australia to C13(rihgt angle) power cord: AS3112 Australia standard 3P plug to IEC C13(right angle),Australia SAA approval.This Australian power cord is also referred to as the AS3112 to C13(right angle) mains power lead or AS 3112 to C13 mains cable.
link to:Australia 3 Prong Plug to ST3 power cord(C13,straight)
AS 3112 Australia three prong power cord right angle plug with SAA certification.Rated up to 10A 250V.Our AS 3112 Australia power cord products are fully molded with a low profile ergonomic design and RoHS and REACH compliant.These are also referred to as AS 3112 mains plug and Australia mains plug.
AS 3112 is the standard plug specification used in Australia and requires that the live and neutral prongs have at least 50percent from base to tip, of a non-conductive coating to help prevent shock if the plug becomes partially dislodged or not plugged in all the way. New Zealand uses the exact same products as Australia and calls this plug the NZS 3112.
AS 3112 is the standard plug specification used in Australia and requires that the live and neutral prongs have at least 50percent from base to tip, of a non-conductive coating to help prevent shock if the plug becomes partially dislodged or not plugged in all the way. New Zealand uses the exact same products as Australia and calls this plug the NZS 311.
Click to here AS3112 Plug to C7:D05/QT2
Click to here AS3112 2 Prong Power Cord:D05 Power Cord Drawing(JPG)
AS 3112 is the standard plug specification used in Australia and requires that the live and neutral prongs have at least 50percent from base to tip, of a non-conductive coating to help prevent shock if the plug becomes partially dislodged or not plugged in all the way. New Zealand uses the exact same products as Australia and calls this plug the NZS 311.
AS3112 Plug to C13:D06/QT3
AS3112 Plug to C5:D06/QT1
AS3112 Plug to C13(right angle):D06/ST3W
AS3112 Heavy-Duty Plug:
AS 3112 is the standard plug specification used in Australia and requires that the live and neutral prongs have at least 50percent from base to tip, of a non-conductive coating to help prevent shock if the plug becomes partially dislodged or not plugged in all the way. New Zealand uses the exact same products as Australia and calls this plug the NZS 311.
AS 3112 is the standard plug specification used in Australia and requires that the live and neutral prongs have at least 50percent from base to tip, of a non-conductive coating to help prevent shock if the plug becomes partially dislodged or not plugged in all the way. New Zealand uses the exact same products as Australia and calls this plug the NZS 311.
Click here:D06(Light-Duty)